|
| Centre Height over flat bed ways : |
165 m.m. |
| Swing Over Bed : |
325 m.m. |
| Swing Over Cross Slide : |
175 m.m. |
| Swing in Gap : |
500 m.m. |
| Width of Bed |
225 m.m. |
|
|
| MODEL |
ADMIT BETWEEN
CENTRES |
LENGTH OF BED |
Floor Space
Occupied (m.m.) |
Aprox.Weight in Kgs. |
Aprox. Case
Dimensions (m.m.) |
| Nett. |
Gross |
| VGL-2 |
660 m.m. |
1370 m.m. |
1500×850 |
550 |
725 |
1700x900x1350 |
| VGL-3 |
890 m.m. |
1600 m.m. |
1750×850 |
600 |
790 |
1950x900x1350 |
| VGL-4 |
1135 m.m. |
1820 m.m. |
2200×850 |
650 |
850 |
2400x900x1350 |
|
|
|
|
|
| Type of Spindle Nose
Spindle bore
Spindle Morse Taper
Spindle Adapter Morse Taper
Spindle Speeds
Nos. / RPM Range
Spindle Mounting on |
: Threaded
: 38 m.m.
: MT – 5
: MT – 3
: 8 54, 90, 140, 224, RPM
315, 500, 775, 1200. RPM
: Taper Roller Bearings |
STANDARD ACCESSORIES :
Flame Hardened bed ways, Chuck back plate 1 no, centre adapter, Dead centres 2 nos., Tool Post Spanner, Motor pulley, Thread dial indicator, Change gear set – 1 (For metric and inch both) and Norton gearbox.
|
|
|
|
|
|
| Spindle Diameter |
: 38.1 m.m. |
OPTIONAL ACCESSORIES :
Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, motorised coolant pump with tank and fittings, Rear tool post with extended cross slide, Chuck back plates (Extra), and Electricals (Motor, Panel board, Wirings, Push button Switches, V-belts and fittings), Electrical Switch shaft and splash guard.
|
| Spindle Travel |
: 120 m.m. |
| Spindle Morse Taper |
: MT – 3 |
| LEADING SCREW : Diameter / Threads : 25.4 m.m. / 4 TPI |
| Nos. of Threads / Range |
Metric : |
17 / 0.5 m.m. To 15 m.m. Pitch |
| (For Fully norton Gearbox) |
Inch : |
40 / 2 to 60 TPI |
|
|
| ELECTRICALS : |
| Electric Motor of 1 H.P. / 0.75 k.w., 3 Phase, 50 Hz, 440 V., 1440 RPM with Reverse – Forward switch, V-Belt, Electrical Wirings and fittings. |
|
|
| NOTE : |
| (1) As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.
(2) The descriptions of standard accessories confirms to it’s list and not the photograph of the machine shown in the catalogue. |
|
|
