TECHNICAL DATA AND SPECIFICATIONS
FOR STANDARD MODEL VGH-0, VGH-1, VGH-2, VGH-3, VGH-4, VGH-5, VGH-6, VGH-7, VGH-8. |
|
|
STD C.H. |
12” C.H. |
| Centre Height over flat bed ways : |
267 m.m. |
305 m.m. |
| Swing Over Bed : |
525 m.m. |
600 m.m. |
| Swing Over Cross Slide : |
300 m.m. |
375 m.m. |
| Swing In Gap : |
830 m.m. |
910 m.m. |
| Length of Gap in front of Face Plate : |
200 m.m. |
200 m.m. |
|
| Width of Bed :STANDARD 325 m.m. (13”) / OPTIONAL : 375 m.m. (15”) |
|
|
| MODEL |
ADMIT
BETWEEN
CENTRES |
LENGTH
OF BED |
Floor Space
Occupied (m.m.) |
Aprox. Weight
in kgs. |
Aprox. Case
Dimensions
(m.m.) |
| Nett. |
Gross |
| VGH-0 |
525 m.m. |
1675 m.m. (5’-6”) |
2200 x 1450 |
1450 |
1750 |
2400 x 1300 x 1600 |
| VGH-1 |
1000 m.m. |
2135 m.m. (7’) |
2660 x 1450 |
1500 |
1900 |
2850 x 1300 x 1600 |
| VGH-2 |
1600 m.m. |
2745 m.m. (9’) |
3140 x 1450 |
1650 |
2150 |
3350 x 1300 x 1600 |
| VGH-3 |
1900 m.m. |
3050 m.m. (10’) |
3500 x 1450 |
1900 |
2450 |
3700 x 1300 x 1600 |
| VGH-4 |
2500 m.m. |
3660 m.m. (12’) |
4110 x 1450 |
2050 |
2650 |
4300 x 1300 x 1600 |
| VGH-5 |
3100 m.m. |
4270 m.m. (14’) |
4720 x 1450 |
2350 |
2950 |
5000 x 1300 x 1600 |
| VGH-6 |
3710 m.m. |
4875 m.m. (16’) |
5330 x 1450 |
2700 |
3400 |
5550 x 1300 x 1600 |
| VGH-7 |
4320 m.m. |
5485 m.m. (18’) |
5940 x 1450 |
3000 |
3800 |
6100 x 1300 x 1600 |
| VGH-8 |
4930 m.m. |
6095 m.m. (20’) |
6550 x 1450 |
3300 |
4200 |
6710 x 1300 x 1600 |
|
|
|
|
| Type of Spindle Nose
Spindle Morse Taper
Spindle Adapter Morse
TaperSpindle Speeds
Nos. / RPM Range
Spindle Mounting on |
: A 2 – 6
: MT-6
: MT-4
: 12 / (30, 43, 55, 85, 115, 160, 210,
285, 400, 545, 785, 1060. RPM )
: Taper Roller Bearings |
STANDARD ACCESSORIES :
Flame Hardened bed ways,
Chuck back plate 1 no, centre adapter, Dead centres (MT – 4) 2 nos, Tool Post Spanner, Motor pulley, Thread dial indicator, Change gear set – 1 (For metric and inch both) and Norton gearbox. |
|
|
| TAIL STOCK SPINDLE : Diameter : 60.3 m.m. / Travel : 180 m.m. / Morse Taper : MT-4 |
|
|
| LEADING SCREW : Diameter / Threads : 38 m.m. / 4 TPI |
|
|
| THREADS |
OPTIONAL ACCESSORIES :
Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, motorised coolant pump with tank and fittings, Rear tool post with extended cross slide, Chuck back plates (Extra), and Electricals (Motor, Panel board, Wirings, Push button Switches, V-belts and fittings), Electrical Switch shaft and splash guard.
|
| Nos. of Threads / Range For Fully norton Gearbox) |
Metric :
Inch : |
17 / 0.5 m.m. To 15 m.m. Pitch
40 / 2 to 60 TPI |
| FEEDS |
| Nos. of Feeds / Range For Fully norton Gearbox) |
Longitudinal :
Cross : |
40 / 0.066 to 2 m.m. / rev. of spindle
40 / 0.0165 to 0.5 m.m. / rev. of spindle |
|
| ELECTRICALS : |
| Electirc motor of 3 HP / 2.25 k.w., 3 Phase, 1440 RPM with Panel board wirings, over load relay, Pushbutton switches, V-belts and fittings. |
|
| NOTE : |
| (1) As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.
(2) The descriptions of standard accessories confirms to it’s list and not the photograph of the machine shown in the catalogue. |
|
