eared Head Medium Duty Lathe Machine Model No : 215 Super Series

TECHNICAL DATA AND SPECIFICATIONS FOR STANDARD MODEL VGM – 215 SUPER SERIES

Centre Height over flat bed ways :	215 m.m.
Swing Over Bed :	423 m.m.
Swing Over Cross Slide :	250 m.m.
Swing in Gap :	620 m.m.
Width of Bed :	277 m.m.

MODEL	ADMIT BETWEEN CENTRES	LENGTH OF BED	Floor Space Occupied (m.m.)	Aprox.Weight in Kgs.		Aprox. Case Dimensions (m.m.)
MODEL	ADMIT BETWEEN CENTRES	LENGTH OF BED	Floor Space Occupied (m.m.)	Nett.	Gross	Aprox. Case Dimensions (m.m.)
VGM-1	450 m.m.	1370 m.m.(4′-6″)	1650×970	775	825	2000x1000x1500
VGM-2	725 m.m.	1600 m.m.(5′-3″)	1950×970	850	900	2200x1000x1500
VGM-3	950 m.m.	1830 m.m.(6′)	2100×970	875	925	2500x1000x1500

MAIN SPINDLE :

Type of Spindle Nose

Spindle bore

Spindle Morse Taper

Spindle Adapter Morse Taper

Spindle Speeds
Nos. / RPM Range

Spindle Mounting on

: Threaded

: 38 m.m.

: MT – 5

: MT – 3

: 8 54, 90, 140, 224, RPM
315, 500, 775, 1200. RPM

: Taper Roller Bearings

STANDARD ACCESSORIES :
Flame Hardened bed ways, Chuck back plate 1 no, centre adapter, Dead centres 2 nos., Tool Post Spanner, Motor pulley, Thread dial indicator, Change gear set – 1 (For metric and inch both) and Norton gearbox.

TAIL STOCK SPINDLE :

Spindle Diameter	: 50.8 m.m.		OPTIONAL ACCESSORIES : Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, motorised coolant pump with tank and fittings, Rear tool post with extended cross slide, Chuck back plates (Extra), and Electricals (Motor, Panel board, Wirings, Push button Switches, V-belts and fittings), Electrical Switch shaft and Splash guard.
Spindle Travel	: 145 m.m.
Spindle Morse Taper	: MT – 4
LEADING SCREW : Diameter / Threads : 31.75 m.m. / 4 TPI
Nos. of Threads / Range	Metric :	17 / 0.5 m.m. To 15 m.m. Pitch
(For Fully norton Gearbox)	Inch :	40 / 2 to 60 TPI

ELECTRICALS :

Electric motor of 2 HP / 1.5 k.w., 3 Phase, 1440 RPM with Panel board wirings, Pushbutton switches or Reverse – Forward Switch, V-belts and fittings.

NOTE :

(1) As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.

(2) The descriptions of standard accessories confirms to it’s list and not the photograph of the machine shown in the catalogue.