TECHNICAL DATA AND SPECIFICATIONS
FOR STANDARD MODEL VH-0, VH-1, VH-2, VH-3, VH-4, VH-5, VH-6, VH-7, VH-8. |
|
|
STD C.H. |
12” C.H. |
| Centre Height over flat bed ways : |
267 m.m. |
305 m.m. |
| Swing Over Bed : |
525 m.m. |
600 m.m. |
| Swing Over Cross Slide : |
300 m.m. |
375 m.m. |
| Swing In Gap : |
830 m.m. |
910 m.m. |
| Length of Gap in front of Face Plate : |
200 m.m. |
200 m.m. |
|
| Width of Bed : STANDARD 325 m.m. (13”) | OPTIONAL : 375 m.m. (15”) |
|
|
| MODEL |
ADMIT
BETWEEN
CENTRES |
LENGTH
OF BED |
Floor Space
Occupied (m.m.) |
Aprox. Weight
in kgs. |
Aprox. Case
Dimensions
(m.m.) |
| Nett. |
Gross |
| VH-0 |
525 m.m. |
1675 m.m. (5’-6”) |
2200 x 1450 |
1200 |
1500 |
2400 x 1300 x 1600 |
| VH-1 |
1000 m.m. |
2135 m.m. (7’) |
2660 x 1450 |
1300 |
1700 |
2850 x 1300 x 1600 |
| VH-2 |
1600 m.m. |
2745 m.m. (9’) |
3140 x 1450 |
1400 |
1900 |
3350 x 1300 x 1600 |
| VH-3 |
1900 m.m. |
3050 m.m. (10’) |
3500 x 1450 |
1650 |
2200 |
3700 x 1300 x 1600 |
| VH-4 |
2500 m.m. |
3660 m.m. (12’) |
4110 x 1450 |
1800 |
2400 |
4300 x 1300 x 1600 |
| VH-5 |
3100 m.m. |
4270 m.m. (14’) |
4720 x 1450 |
2100 |
2700 |
5000 x 1300 x 1600 |
| VH-6 |
3710 m.m. |
4875 m.m. (16’) |
5330 x 1450 |
2500 |
3200 |
5550 x 1300 x 1600 |
| VH-7 |
4320 m.m. |
5485 m.m. (18’) |
5940 x 1450 |
2800 |
3600 |
6100 x 1300 x 1600 |
| VH-8 |
4930 m.m. |
6095 m.m. (20’) |
6550 x 1450 |
3100 |
4000 |
6710 x 1300 x 1600 |
|
|
|
|
| Spindle bore / Nose diameter X Threads: |
| Standard |
: 51 m.m. / 74.3 m.m. X 6 TPI |
| OPTIONAL |
: 76 .m.m / 102.85 m.m. X 6 TPI |
| OPTIONAL |
: 101 .m.m / 131.45 m.m. X 6 TPI |
| Spindle Morse Taper |
: MT-6 |
| Spindle Adapter Morse Taper |
: MT-4 |
| Spindle Speeds Nos. / Range |
: 8 / 28 to 520 R.P.M. |
| Spindle Drive Standard |
: Flat Belt
OPTIONAL : V-Belt |
| Spindle Mounting Standard |
: Split Bush Bearings
OPTIONAL : Taper Roller Bearings |
|
STANDARD ACCESSORIES :
Flame Hardened bed ways,
Chuck back plate 1 no, centre adapter, Dead centres (MT – 4) 2 nos, Tool Post Spanner, Motor pulley, Thread dial indicator, chip tray, Nylone flat belt, Change gear set – 1 (For metric and inch both)
|
|
|
| TAIL STOCK SPINDLE : Diameter : 60.3 m.m. / Travel : 180 m.m. / Morse Taper : MT-4 |
|
|
| LEADING SCREW : Diameter / Threads : 38 m.m. / 4 TPI |
|
| THREADS |
OPTIONAL ACCESSORIES :
Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, motorised coolant pump with tank and fittings, Rear tool post with extended cross slide, Norton gear box, Chuck back plates (Extra), V-Belt drive pullies in lieu of flat belt, main spindle mounted on taper roller bearings in lieu of bush bearings and Electricals (Motor, Switch, wirings, V-belts and fittings)
|
Nos. of Threads / Range
(Without norton Gearbox) |
Metric
Inch |
13 / 1 m.m. To 6 m.m. Pitch
19 /2 to 24 TPI |
Nos. of Threads / Range
(For Fully norton Gearbox) |
Metric
Inch |
17 / 0.5 m.m. To 15 m.m. Pitch
40 / 2 to 60 TPI |
| FEEDS |
Nos. of Feeds / Range
(Without norton Gearbox ) |
Longitudinal
Cross |
19 / 0.165 To 1.996 m.m. / rev. of spindle
19 / 0.04 To 0.485 m.m. / rev. of spindle |
Nos. of Feeds / Range
(For Fully norton Gearbox) |
Longitudinal
Cross |
40 / 0.066 to 2 m.m. / rev. of spindle
40 / 0.0165 to 0.5 m.m. / rev. of spindle |
|
|
| ELECTRICALS : |
| Electric Motor of 3 H.P. / 2.25 k.w., 3 Phase, 50 Hz, 440 V., 1440 RPM with Reverse-Forward switch, V-Belt, Electrical Wirings and fittings. |
|
| IMPORTANT : |
| Any Change in Specifications of the machine like center height, width of bed, hollow of spindle etc. Will be provided as per requirements at extra cost. |
|
| NOTE : |
| As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us. |
|
