TECHNICAL DATA AND SPECIFICATIONS FOR STANDARD MODEL VL-2, VL-3, VL-4. |
|
|
STD C.H. |
| Centre Height over flat bed ways : |
165 m.m. |
| Swing Over Bed : |
325 m.m. |
| Swing Over Cross Slide : |
175 m.m. |
| Swing In Gap : |
510 m.m. |
| Length of Gap in front of Face Plate : |
115 m.m. |
| Width of Bed : |
225 m.m. |
|
|
| MODEL |
ADMIT
BETWEEN
CENTRES |
LENGTH
OF BED |
Floor Space
Occupied (m.m.) |
Aprox. Weight
in kgs. |
Aprox. Case
Dimensions
(m.m.) |
| Nett. |
Gross |
| VL-2 |
660 m.m. |
1370 m.m. |
1500 x 850 |
450 |
625 |
1700 x 900 x 1350 |
| VL-3 |
890 m.m. |
1600 m.m. |
1750 x 850 |
500 |
690 |
1950 x 900 x 1350 |
| VL-4 |
1135 m.m. |
1820 m.m. |
2200 x 850 |
550 |
750 |
2400 x 900 x 1350 |
|
|
|
|
| Spindle bore |
: 40 m.m. |
| Spindle Nose diameter |
: 60 m.m. |
| Spindle thread |
: 8 T.P.I. |
| Spindle Morse Taper |
: MT-5 |
| Spindle Adapter Morse Taper |
: MT-3 |
| Spindle Speeds |
: 8 |
| Spindle Speeds Range |
: 40 to 950 R.P.M. |
| Spindle Drive |
: V – Belt, |
| Spindle Mounting |
: Taper Roller Bearings |
|
STANDARD ACCESSORIES :
Flame Hardened bed ways,
Chuck back plate 1 no, centre adapter, Dead centres (MT – 3) 2 nos, Tool Post Spanner, Motor pulley, Thread dial indicator, chip tray, Change gear set – 1 (For metric and inch both) |
|
|
| TAIL STOCK SPINDLE : |
OPTIONAL ACCESSORIES :
Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, motorised coolant pump with tank and fittings, Rear tool post with extended cross slide, Norton gear box, Chuck back plates (Extra), and Electricals (Motor, Switch, wirings, V-belts and fittings) |
| Spindle diameter |
: 38.1 m.m. |
| Spindle travel |
: 120 m.m. |
| Spindle Morse Taper |
: MT – 3 |
|
| LEADING SCREW : Diameter / Threads : 25.4 m.m. / 4 TPI |
| Threads |
Nos. of Threads / Range
(Without norton Gearbox ) |
Metric :
Inch : |
13 / 1 m.m. To 6 m.m. Pitch
19 / 2 To 24 T.P.I. |
Nos. of Threads / Range
(For Fully norton Gearbox) |
Metric :
Inch : |
17 / 0.5 m.m. To 15 m.m. Pitch
40 / 2 To 60 T.P.I. |
|
|
|
| ELECTRICALS : |
| Electric Motor of 1 H.P. / 0.75 k.w., 3 Phase, 50 Hz, 440 V., 1440 RPM with Reverse-Forward switch, V-Belt, Electrical Wirings and fittings. |
|
| NOTE : |
| As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us. |
|
